Its main feature the absence of the fan into the LED engine. It allows you to have all the functions of the LEDko but at the same time turns out to be a very silent product, suitable for any type of installation even where maximum silence and respect is required
EllipsoidalsLEDko SHHH
Designed with new body, new electronics and OLED display, this product ia a fanless LED engine variant of the LEDko
T Studio
D Studio
VariWhite
FullSpectrum
LEDko SHHH
T Studio
Specifications
- Fixed white CCT 3.200 K
- CRI > 95, TLCI > 95
- 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
- Fanless LED engine
- Manual Yoke
- Aluminum body
- Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
- Thermally insulated knobs and shutter handles
- IP20
- Black body (standard), custom color on request (optional)
Light source
Tungsten COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- LEDko SHHH with integrated Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 278 mm / 10.95 in
- Height: 435 mm / 17.13 in
- Weight: 12 Kg / 26.45 lbs
- LEDko SHHH with remote Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 260 mm / 10.24 in
- Height: 335 mm / 13.19 in
- Weight: 10 Kg / 22.1 lbs
- Power Supply Box
- Length: 190 mm / 7.48 in
- Width: 110 mm / 4.33 in
- Height: 73 mm / 2.87 in
- Weight: 2 Kg / 4.41 lbs
control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional by LumenRadio)
- RDM configuration
- DMX Channels: 5 / 1
- Graphic OLED with on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 85-264V, 50/60Hz, auto-sensing
- 220 W Maximum – 1.06 A at 230 V, 2.13 A at 115 V – cosφ: 0.9
- In and Out PowerCON TRUE1 Top connectors, 1.5 m (4.9 ft) PowerCon cable without power plug
- In and Out DMX 5 pin locking XLR connectors
Accessories
- 1.5 m power cable with PowerCON TRUE1 Top without power plug (GKIT17, USA / GKIT16, EU)
- Metal Gobo Holder (BC10011A106)
LEDko SHHH
D Studio
Specifications
- Fixed white CCT 5.600 K
- CRI > 95, TLCI > 95
- 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
- Fanless LED engine
- Manual Yoke
- Aluminum body
- Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
- Thermally insulated knobs and shutter handles
- IP20
- Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- LEDko SHHH with integrated Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 278 mm / 10.95 in
- Height: 435 mm / 17.13 in
- Weight: 12 Kg / 26.45 lbs
- LEDko SHHH with remote Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 260 mm / 10.24 in
- Height: 335 mm / 13.19 in
- Weight: 10 Kg / 22.1 lbs
- Power Supply Box
- Length: 190 mm / 7.48 in
- Width: 110 mm / 4.33 in
- Height: 73 mm / 2.87 in
- Weight: 2 Kg / 4.41 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional by LumenRadio)
- RDM configuration
- DMX Channels: 5 / 1
- Graphic OLED with on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 85-264V, 50/60Hz, auto-sensing
- 220 W Maximum – 1.06 A at 230 V, 2.13 A at 115 V – cosφ: 0.9
- In and Out PowerCON TRUE1 Top connectors, 1.5 m (4.9 ft) PowerCon cable without power plug
- In and Out DMX 5 pin locking XLR connectors
Accessories
- 1.5 m power cable with PowerCON TRUE1 Top without power plug (GKIT17, USA / GKIT16, EU)
- Metal Gobo Holder (BC10011A106)
LEDko SHHH
VariWhite
Specifications
- VariWhite COB LED
- CCT range from 2.700K to 6.500K
- CRI > 95, TLCI > 95
- 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz fixed at 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
- Fanless LED engine
- Manual Yoke
- Aluminum body
- Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
- Thermally insulated knobs and shutter handles
- IP20
- Black body (standard), custom color on request (optional)
Light source
Variable White COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- LEDko SHHH with integrated Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 278 mm / 10.95 in
- Height: 435 mm / 17.13 in
- Weight: 12 Kg / 26.45 lbs
- LEDko SHHH with remote Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 260 mm / 10.24 in
- Height: 335 mm / 13.19 in
- Weight: 10 Kg / 22.1 lbs
- Power Supply Box
- Length: 190 mm / 7.48 in
- Width: 110 mm / 4.33 in
- Height: 73 mm / 2.87 in
- Weight: 2 Kg / 4.41 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional by LumenRadio)
- RDM configuration
- DMX Channels: 5 / 2 / 1 / Sunrise / Raw / MK1 / 6 Channels
- Graphic OLED with on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 85-264V, 50/60Hz, auto-sensing
- 220 W Maximum – 1.06 A at 230 V, 2.13 A at 115 V – cosφ: 0.9
- In and Out PowerCON TRUE1 Top connectors, 1.5 m (4.9 ft) PowerCon cable without power plug
- In and Out DMX 5 pin locking XLR connectors
Accessories
- 1.5 m power cable with PowerCON TRUE1 Top without power plug (GKIT17, USA / GKIT16, EU)
- Metal Gobo Holder (BC10011A106)
LEDko SHHH
FullSpectrum
Specifications
- RGBCLA (Red, Green, Blue, Cyan, Lime, Amber) color mixing with hue and saturation control
- CCT from 2.700 K to 10.000 K (through DMX) or up to 20.000 K (through Display)
- CRI > 95, TLCI > 95
- Continously Green-Magenta adjustment (Full Minusgreen to Full Plusgreen)
- 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz fixed at 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
- Fanless LED engine
- Manual Yoke
- Aluminum body
- Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
- Thermally insulated knobs and shutter handles
- IP20
- Black body (standard), custom color on request (optional)
Light source
RGBCLA LEDs module, L80 Rating, 50.000 hours to 80% output
Physical size
- LEDko SHHH with integrated Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 278 mm / 10.95 in
- Height: 435 mm / 17.13 in
- Weight: 12 Kg / 26.45 lbs
- LEDko SHHH with remote Power Supply Box
- Length: 739 mm / 29.09 in
- Width: 260 mm / 10.24 in
- Height: 335 mm / 13.19 in
- Weight: 10 Kg / 22.1 lbs
- Power Supply Box
- Length: 190 mm / 7.48 in
- Width: 110 mm / 4.33 in
- Height: 73 mm / 2.87 in
- Weight: 2 Kg / 4.41 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional by LumenRadio)
- RDM configuration
- DMX Channels: 16 / 7 / 1 / Studio / RGB / Fine RGB / Sunrise Mode
- Graphic OLED with on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 85-264V, 50/60Hz, auto-sensing
- 220 W Maximum – 1.06 A at 230 V, 2.13 A at 115 V – cosφ: 0.9
- In and Out PowerCON TRUE1 Top connectors, 1.5 m (4.9 ft) PowerCon cable without power plug
- In and Out DMX 5 pin locking XLR connectors
Accessories
- 1.5 m power cable with PowerCON TRUE1 Top without power plug (GKIT17, USA / GKIT16, EU)
- Metal Gobo Holder (BC10011A106)
