Ellipsoidals

LEDko HD +

Designed with HD electronics and a new OLED display, this spot profile projector is the evolution of the LEDko and the normal HD.

The HD + electronic with advanced LED controller enables smooth dimming and it offers higher luminous efficiency, with a color rendering index of the white range greater than 95. Very quick setup of the functions thanks to the potentiometer knob.


VariWhite HD +
FullSpectrum 6 HD-R
LEDko HD +
VariWhite HD +
Specifications
  • VariWhite COB LED
  • CCT range from 2.700K to 6.500K
  • CRI >95 (CRI > 95.9 @ 3.200 K – CRI > 96.5 @ 5.600 K), TLCI ≥ 97.7
  • 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
  • Fast, Slow and Very Slow Dimming Smooth Selection
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Swappable lens tubes between 5°–90°
  • Camera flicker control/Hz range from 600 Hz to 20.000 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B
  • Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
  • 4 different fan settings: Silent, Studio, Auto, DMX Regulated
  • Manual Yoke, Pole Operated Pan-Tilt-Zoom (Accessory)
  • Flame-retardant technopolymer reinforced with fiberglass
  • Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
  • Thermally insulated knobs and shutter handles
  • IP20 (available IP65 LEDko EXT Series)
  • Black body (standard), custom color on request (optional)
Light source
Variable White COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
  • Length: 362mm / 14.25in (body) - 601mm / 23.66in (with Profile Zoom 28°/40° optic)
  • Width: 212mm / 8.35in
  • Height: 189mm / 7.44in - 372mm / 14.64in (with bracket)
  • Weight: 189mm / 7.44in - 372mm / 14.64in (with bracket)
control protocol and programming
  • DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
  • RDM configuration
  • DMX Channels: 5 / 2 / 1
  • Graphic OLED with on-board selector for quick setting
  • Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
  • 90-264V, 50/60Hz, auto-sensing
  • 220W Maximum – 0.97A at 230V, 1.95A at 115V – cosφ: 0.98
  • In and Out PowerCON TRUE1 Top connectors, 2 m (6.6 ft) PowerCon cable without power plug
  • In and Out DMX 5 pin locking XLR connectors
Accessories
  • 1.5 m power cable with PowerCON TRUE1 Top and bare ends, included (GKIT17, USA / GKIT16, EU)
  • Metal Gobo Holder (BC10011A106)
  • Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
  • Front Barrel with Burnished Blades (BC10011A000)
  • 4-Leaf Barndoor (BC10034A003)
  • Magnetic Gobo Holder (BC10011A006)
  • Gobo Holder for Glass Gobo (BC10011A030)
  • Iris (BC10011A010)
  • Gobo Holder for Iris Slot (BC10011A049)
  • Hook Clamp available in various models
  • Light Clamp available in various models
  • Clamp available in various models
  • Wireless Kit, LumenRadio (BC10011A100)
  • Pole Operated Yoke (BC10011A150)
  • Donut available in various sizes
  • Half Top Hat available in various sizes
  • Top Hat available in various sizes
  • Color Frame Holder available in various sizes
LEDko HD +
FullSpectrum 6 HD-R
Specifications
  • RGBCLA (Red, Green, Blue, Cyan, Lime, Amber) color mixing with hue and saturation control
  • A more saturated red than the FullSpectrum 6 HD Studio +
  • CCT from 2.700 K to 10.000 K (through DMX) or up to 20.000 K (through Display)
  • CRI > 95, TLCI > 95
  • Continously Green-Magenta adjustment (Full Minusgreen to Full Plusgreen)
  • 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
  • Fast, Slow and Very Slow Dimming Smooth Selection
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Swappable lens tubes between 5°–90°
  • Camera flicker control/Hz range from 600 Hz to 20.000 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B
  • Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
  • 4 different fan settings: Silent, Studio, Auto, DMX Regulated
  • Manual Yoke, Pole Operated Pan-Tilt-Zoom (Accessory)
  • Flame-retardant technopolymer reinforced with fiberglass
  • Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
  • Thermally insulated knobs and shutter handles
  • IP20 (available IP65 LEDko EXT Series)
  • Black body (standard), custom color on request (optional)
Light source
RGBCLA LEDs module, L80 Rating, 50.000 hours to 80% output
Physical size
  • Length: 362mm / 14.25in (body) - 601mm / 23.66in (with Profile Zoom 28°/40° optic)
  • Width: 212mm / 8.35in
  • Height: 189mm / 7.44in - 372mm / 14.64in (with bracket)
  • Weight: 189mm / 7.44in - 372mm / 14.64in (with bracket)
Control protocol and programming
  • DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
  • RDM configuration
  • DMX Channels: 16 / 7 / 1 / Studio mode / RGB mode / Fine RGB mode / Sunrise mode
  • Graphic OLED with on-board selector for quick setting
  • Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
  • 80-264V, 50/60 Hz, auto-sensing
  • 220W Maximum – 1.06A at 230V, 2.13A at 115V – cosφ: 0.9
  • In and Out PowerCON TRUE1 Top connectors
  • In and Out DMX 5 pin locking XLR connectors
Accessories
  • 1.5 m power cable with PowerCON TRUE1 Top and bare ends, included (GKIT17, USA / GKIT16, EU)
  • Metal Gobo Holder (BC10011A106)
  • Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
  • Front Barrel with Burnished Blades (BC10011A000)
  • 4-Leaf Barndoor (BC10034A003)
  • Magnetic Gobo Holder (BC10011A006)
  • Gobo Holder for Glass Gobo (BC10011A030)
  • Iris (BC10011A010)
  • Gobo Holder for Iris Slot (BC10011A049)
  • Hook Clamp available in various models
  • Light Clamp available in various models
  • Clamp available in various models
  • Wireless Kit, LumenRadio (BC10011A100)
  • Pole Operated Yoke (BC10011A150)
  • Donut available in various sizes
  • Half Top Hat available in various sizes
  • Top Hat available in various sizes
  • Color Frame Holder available in various sizes