The LEDko EXT family has been designed to meet the needs of architects and lighting designers, who were looking for weatherproof lighting fixtures suitable not only for temporary, but also for permanent outdoor installations.
This unique IP 65 LED Profile Spot Light includes a dual gobo rotator engine controllable by DMX: in this way the two gobos can be used at the same time in counter-rotation to create impressive dynamic effects such as water, fire, rain, etc.
The four-blade framing system is however available as an accessory and can be used instead of the dual gobo rotator.
A zoom lens system ranging from 14° to 35°, 10° to 25°, 30° to 60° or fixed at 80°, bare ends power input cable and in/out 5 pin XLR connectors for DMX signal rated IP 65 complete the product profile. The fixture has in addition a lockable display thanks to a freely selectable security pin code.
Fixed white CCT (3.200 K or 5.600 K) and RGBLA color versions available.
Image ProjectorsLEDko EXT with dual gobo rotator
The LEDko EXT family has been designed to meet the needs of architects and lighting designers, who were looking for weatherproof lighting fixtures suitable not only for temporary, but also for permanent outdoor installations.
PDF
Download center
- LEDko EXT T gobo rotator + CRI 80
- LEDko EXT T gobo rotator + CRI 90
- LEDko EXT T gobo rotator + .IES
- LEDko EXT T gobo rotator + .LDT
- LEDko EXT D gobo rotator + CRI 80
- LEDko EXT D gobo rotator + CRI 90
- LEDko EXT D gobo rotator + .IES
- LEDko EXT D gobo rotator + .LDT
- LEDko EXT FullSpectrum RGBLA gobo rotator + (10-25 Optic)
- LEDko EXT FullSpectrum RGBLA gobo rotator + (17-38 Optic)
Tungsten
Daylight
FullSpectrum RGBLA
LEDko EXT with dual gobo rotator
Tungsten
Specifications
- Fixed white CCT 3.200 K
- CRI > 80, CRI >90
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Pulse electronic strobe
- Two overlapping rotating gobos (optional)
- Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
- Ambient Operating Temperature from -40°C to +40°C (-40°F to 104°F)
- 2 different fan settings: Silent and Auto
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- EPA: Projector front area – 41599.2 sq.mm (0.4476 sq.ft), projector side area – 192211 sq.mm (2.0689 sq.ft)
- IP65
- Black body (standard), custom color on request (optional)
Light source
Tungsten COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- 14°- 35° Zoom
- Length: 687.8mm / 28.07in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 16.9Kg / 37.25lbs
- 10°- 25° Zoom
- Length: 807.7mm / 31.8in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 18Kg / 39.68lbs
- 30°- 60° Zoom
- Length: 580mm / 22.83in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.6Kg / 34.39lbs
- 80° Optic
- Length: 500mm / 19.68in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.1Kg / 33.2lbs
control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 8 / 4
- Graphic OLED on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 80-264V, 50/60Hz, auto-sensing
- 285W Maximum – 1.26 A at 230 V, 2.53 A at 115 V – cosφ 0.98
- Integral cable Bare Ends
- In and Out DMX 5 pin locking XLR connectors IP65
Accessories
- Profile Zoom 10°-25° (BC10029A002)
- Profile Zoom 14°-35° (BC10029A000)
- Profile Zoom 30°-60° (BC10029A004)
- Lens Tube Profile 80° (BC10029A005)
- Four blade framing system, this accessory can be installed as an alternative to the dual gobo rotator (BC10028A000)
- Frame Holder (BC10029A003)
- LEDko EXT wireless kit (BC10029A100)
- Metal key for gobo mounting, included (BC10028A001)
- DMX end of line closure cap, indispensable for the last projector of the line (RME34/G)
LEDko EXT with dual gobo rotator
Daylight
Specifications
- Fixed white CCT 5.600 K
- CRI > 80, CRI >90
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Pulse electronic strobe
- Two overlapping rotating gobos (optional)
- Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
- Ambient Operating Temperature from -40°C to +40°C (-40°F to 104°F)
- 2 different fan settings: Silent and Auto
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- EPA: Projector front area – 41599.2 sq.mm (0.4476 sq.ft), projector side area – 192211 sq.mm (2.0689 sq.ft)
- IP65
- Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- 14°- 35° Zoom
- Length: 687.8mm / 28.07in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 16.9Kg / 37.25lbs
- 10°- 25° Zoom
- Length: 807.7mm / 31.8in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 18Kg / 39.68lbs
- 30°- 60° Zoom
- Length: 580mm / 22.83in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.6Kg / 34.39lbs
- 80° Optic
- Length: 500mm / 19.68in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.1Kg / 33.2lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 19 / 10 / 4 / Studio mode / RGB mode
- Graphic OLED on-board selector for quick setting
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 80-264V, 50/60Hz, auto-sensing
- 285W Maximum – 1.26 A at 230 V, 2.53 A at 115 V – cosφ 0.98
- Integral cable Bare Ends
- In and Out DMX 5 pin locking XLR connectors IP65
Accessories
- Profile Zoom 10°-25° (BC10029A002)
- Profile Zoom 14°-35° (BC10029A000)
- Profile Zoom 30°-60° (BC10029A004)
- Lens Tube Profile 80° (BC10029A005)
- Four blade framing system, this accessory can be installed as an alternative to the dual gobo rotator (BC10028A000)
- Frame Holder (BC10029A003)
- LEDko EXT wireless kit (BC10029A100)
- Metal key for gobo mounting, included (BC10028A001)
- DMX end of line closure cap, indispensable for the last projector of the line (RME34/G)
LEDko EXT with dual gobo rotator
FullSpectrum RGBLA
Specifications
- RGBCLA (Red, Green, Blue, Cyan, Lime, Amber) color mixing with hue and saturation control
- Proportional control from 2.700K → 6.500K
- CRI > 85
- Smooth 100% to 0%, 5 Selectable Curves – Exponential, Logarithmic, Linear, Halo and Standard
- Pulse electronic strobe
- Two overlapping rotating gobos (optional)
- Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
- Ambient Operating Temperature from -40°C to +40°C (-40°F to 104°F)
- 2 different fan settings: Silent and Auto
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- IP65
- Black body (standard), custom color on request (optional)
Light source
RGBLA LEDs module, L80 Rating, 50.000 hours to 80% output
Physical size
- 14°- 35° Zoom
- Length: 687.8mm / 28.07in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 16.9Kg / 37.25lbs
- 10°- 25° Zoom
- Length: 807.7mm / 31.8in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 18Kg / 39.68lbs
- 30°- 60° Zoom
- Length: 580mm / 22.83in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.6Kg / 34.39lbs
- 80° Optic
- Length: 500mm / 19.68in
- Width: 218mm / 8.58in
- Height: 185mm / 7.28in - 518.46mm / 20.41in (with bracket)
- Weight: 15.1Kg / 33.2lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), WIreless (optional by LumenRadio)
- RDM configuration
- 19 / 10 / 4 / Studio mode / RGB mode
- Graphic OLED on-board selector for quick setting
- Through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 80-264V, 50/60Hz, auto-sensing
- 285W Maximum – 1.26 A at 230 V, 2.53 A at 115 V – cosφ 0.98
- Integral cable Bare Ends
- In and Out DMX 5 pin locking XLR connectors IP65
Accessories
- Profile Zoom 10°-25° (BC10029A002)
- Profile Zoom 14°-35° (BC10029A000)
- Profile Zoom 30°-60° (BC10029A004)
- Lens Tube Profile 80° (BC10029A005)
- Four blade framing system, this accessory can be installed as an alternative to the dual gobo rotator (BC10028A000)
- Frame Holder (BC10029A003)
- LEDko EXT wireless kit (BC10029A100)
- Metal key for gobo mounting, included (BC10028A001)
- DMX end of line closure cap, indispensable for the last projector of the line (RME34/G)
