Designed with new electronic and a new OLED display, this spot profile projector is the evolution of the standard LEDko. The + electronic with advanced LED controller enables a smooth dimming and it offers and higher luminous efficiency.
EllipsoidalsLEDko EXT Engine
Outdoor projector with interchangeable standard optics
Tungsten
Daylight
VariWhite
FullSpectrum
LEDko EXT Engine
Tungsten
Specifications
- Fixed white CCT 3.200 K
- CRI> 80 or >90
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from -40°C to 40°C (from -40°F to 104°F)
- 4 different fan settings: Silent, Studio, Auto, DMX Regulated
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- IP65
- Black body (standard), custom color on request (optional)
Light source
Tungsten COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- Length: 379.2 mm / 14.92 in
- Width: 236 mm / 9.29 in
- Height: 187 mm / 7.36 in - With bracket: 518.5 mm / 20.41 in
- Weight: Body: 9.5 Kg / 20.94 lbs - With front barrel: 11 Kg / 24.25 lbs - With lens tube: 13 Kg / 28.66 lbs - With Zoom Profile 15°/35°: 15.5 Kg / 34.17 lbs - With Zoom Profile 25°/50°: 15 Kg / 33.07 lbs
control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 5 / 1
- Graphic OLED
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 90-230V, 50/60Hz, auto-sensing
- 200 W – 0.92 A at 230 V, 1.83 A at 115 V – cosφ 0.95
- 1.5 m Integral cable Bare Ends
- In/Out IP65 DMX Signal Junction Connector (Cod Art. RCN 73)
Accessories
- Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
- Front Barrel with Burnished Blades (BC10011A000)
- 4-Leaf Barndoor (BC10034A003)
- Metal Gobo Holder (BC10011A106)
- Magnetic Gobo Holder (BC10011A006)
- Gobo Holder for Glass Gobo (BC10011A030)
- Iris (BC10011A010)
- Gobo Holder for Iris Slot (BC10011A049)
- Hook Clamp available in various models
- Light Clamp available in various models
- Clamp available in various models
- Wireless Kit, LumenRadio (BC10011A100)
- Donut available in various sizes
- Half Top Hat available in various sizes
- Top Hat available in various sizes
- Color Frame Holder available in various sizes
LEDko EXT Engine
Daylight
Specifications
- Fixed white CCT 5.600 K
- CRI> 80 or >90
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from -40°C to 40°C (from -40°F to 104°F)
- 4 different fan settings: Silent, Studio, Auto, DMX Regulated
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- IP65
- Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- Length: 379.2 mm / 14.92 in
- Width: 236 mm / 9.29 in
- Height: 187 mm / 7.36 in - With bracket: 518.5 mm / 20.41 in
- Weight: Body: 9.5 Kg / 20.94 lbs - With front barrel: 11 Kg / 24.25 lbs - With lens tube: 13 Kg / 28.66 lbs - With Zoom Profile 15°/35°: 15.5 Kg / 34.17 lbs - With Zoom Profile 25°/50°: 15 Kg / 33.07 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 5 / 1
- Graphic OLED
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 90-230V, 50/60Hz, auto-sensing
- 200 W – 0.92 A at 230 V, 1.83 A at 115 V – cosφ 0.95
- 1.5 m Integral cable Bare Ends
- In/Out IP65 DMX Signal Junction Connector (Cod Art. RCN 73)
Accessories
- Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
- Front Barrel with Burnished Blades (BC10011A000)
- 4-Leaf Barndoor (BC10034A003)
- Metal Gobo Holder (BC10011A106)
- Magnetic Gobo Holder (BC10011A006)
- Gobo Holder for Glass Gobo (BC10011A030)
- Iris (BC10011A010)
- Gobo Holder for Iris Slot (BC10011A049)
- Hook Clamp available in various models
- Light Clamp available in various models
- Clamp available in various models
- Wireless Kit, LumenRadio (BC10011A100)
- Donut available in various sizes
- Half Top Hat available in various sizes
- Top Hat available in various sizes
- Color Frame Holder available in various sizes
LEDko EXT Engine
VariWhite
Specifications
- VariWhite COB LED
- 2.700 K → 6.500 K
- CRI >95 (CRI > 95.9 @ 3.200 K – CRI > 96.5 @ 5.600 K), TLCI ≥ 97.7
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from -40°C to 40°C (from -40°F to 104°F)
- 4 different fan settings: Silent, Studio, Auto, DMX Regulated
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- IP65
- Black body (standard), custom color on request (optional)
Light source
Variable White COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
- Length: 379.2 mm / 14.92 in
- Width: 236 mm / 9.29 in
- Height: 187 mm / 7.36 in - With bracket: 518.5 mm / 20.41 in
- Weight: Body: 9.5 Kg / 20.94 lbs - With front barrel: 11 Kg / 24.25 lbs - With lens tube: 13 Kg / 28.66 lbs - With Zoom Profile 15°/35°: 15.5 Kg / 34.17 lbs - With Zoom Profile 25°/50°: 15 Kg / 33.07 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 5 / 2 / 1
- Graphic OLED
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 80-264 V, 50-60 Hz – Auto-sensing
- 220 W Maximum – 0.97A at 230 V, 1.95A at 115 V – cosφ: 0.98
- 1.5 m Integral cable Bare Ends
- In/Out IP65 DMX Signal Junction Connector (Cod Art. RCN 73)
Accessories
- Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
- Front Barrel with Burnished Blades (BC10011A000)
- 4-Leaf Barndoor (BC10034A003)
- Metal Gobo Holder (BC10011A106)
- Magnetic Gobo Holder (BC10011A006)
- Gobo Holder for Glass Gobo (BC10011A030)
- Iris (BC10011A010)
- Gobo Holder for Iris Slot (BC10011A049)
- Hook Clamp available in various models
- Light Clamp available in various models
- Clamp available in various models
- Wireless Kit, LumenRadio (BC10011A100)
- Donut available in various sizes
- Half Top Hat available in various sizes
- Top Hat available in various sizes
- Color Frame Holder available in various sizes
LEDko EXT Engine
FullSpectrum
Specifications
- RGBCLA COB LED (Red, Green, Blue, Cyan, Lime, Amber) – Color mixing with hue and saturation control
- 2.700 K → 20.000 K
- CRI> 95, TLCI> 95
- 8 or 16 bit, 5 selectable curves: Exponential, Logarithmic, Linear, Halo and Standard
- Fast, Slow and Very Slow Dimming Smooth Selection
- Synchronized, random or pulse electronic strobe
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- Swappable lens tubes between 5°–90°
- Camera flicker control/Hz range from 600 Hz to 20.000 Hz
- Calibrated Cob
- Pattern projection
- Pattern size: A or B
- Ambient Operating Temperature from -40°C to 40°C (from -40°F to 104°F)
- 4 different fan settings: Silent, Studio, Auto, DMX Regulated
- Manual Yoke
- Die-cast aluminium (Anti-Salt treatment)
- Four blade framing system, each shutter blade is adjustable for radial position and angle
- IP65
- Black body (standard), custom color on request (optional)
Light source
RGBCLA LEDs module, L80 Rating, 50.000 hours to 80% output
Physical size
- Length: 379.2 mm / 14.92 in
- Width: 236 mm / 9.29 in
- Height: 187 mm / 7.36 in - With bracket: 518.5 mm / 20.41 in
- Weight: Body: 9.5 Kg / 20.94 lbs - With front barrel: 11 Kg / 24.25 lbs - With lens tube: 13 Kg / 28.66 lbs - With Zoom Profile 15°/35°: 15.5 Kg / 34.17 lbs - With Zoom Profile 25°/50°: 15 Kg / 33.07 lbs
Control protocol and programming
- DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
- RDM configuration
- DMX Channels: 16 / 7 / 1 / Studio / RGB / Fine RGB / Sunrise Mode
- Graphic OLED
- Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
- 90-230 V, 50-60 Hz – Auto-sensing
- 255 W Maximum – 1.19 A at 230 V, 2.38 A at 115 V – cosφ 0.93
- 1.5 m Integral cable Bare Ends
- In/Out IP65 DMX Signal Junction Connector (Cod Art. RCN 73)
Accessories
- Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
- Front Barrel with Burnished Blades (BC10011A000)
- 4-Leaf Barndoor (BC10034A003)
- Metal Gobo Holder (BC10011A106)
- Magnetic Gobo Holder (BC10011A006)
- Gobo Holder for Glass Gobo (BC10011A030)
- Iris (BC10011A010)
- Gobo Holder for Iris Slot (BC10011A049)
- Hook Clamp available in various models
- Light Clamp available in various models
- Clamp available in various models
- Wireless Kit, LumenRadio (BC10011A100)
- Donut available in various sizes
- Half Top Hat available in various sizes
- Top Hat available in various sizes
- Color Frame Holder available in various sizes
